Digital Oscilloscopes DS-5500A,DS-5400 Series
Iwatsu
DS-5500A Series
- Frequency bandwidth 100 - 500MHz
- Maximum Sampling Speed 2GS/s
- Input Channel 4
- Maximum Memory Length 1Mpts/ch
- DS-5400A Series
- Frequency bandwidth 100 - 200MHz
- Maximum Sampling Speed 2GS/s (200MHz Type)
- Maximum Sampling Speed 1GS/s(100MHz Type)
- Input Channel 4
- Maximum Memory Length 500kpts/ch
- Japan Quality
Please click for more information.
| DS-5554A | DS-5552A | DS-5534A | DS-5532A | DS-5524A | DS-5522A | DS-5514A | DS-5512A | |
| Frequency bandwidth(-3dB) | 500MHz | 350MHz | 200MHz | 100MHz | ||||
| Rise time(Typical)） | 750ps | 1ns | 1.75ns | 3.5ns | ||||
| Input Channel | 4 | 2 | 4 | 2 | 4 | 2 | 4 | 2 |
| Maximum Sampling Speed | 1GS/s(all CHs)/ 2GS/s(Channel combined) | 1GS/s | ||||||
| Equivalent Sampling Rate | 100GS/s | |||||||
| Peak detect resolution | 1ns | |||||||
| Averaging | 2 to 256 times | |||||||
| Maximum Memory Length | 1Mpts/ch(for all CHs) | |||||||
| Vertical Resolution | 8-bit | |||||||
| Input voltage range | 2mV/div - 10V/div(1MΩ), 2mV/div - 2V/div(50MΩ) | 2mV/div - 10V/div(1MΩ) | ||||||
| Offset voltage | 2mV/div - 50mV/div : ±1V 50.2mV/div - 500mV/div : ±10V 502mV/div - 10V/div : ±100V | |||||||
| DC gain accuracy | ±1.5% + (0.5% of fullscale) | |||||||
| Maximum Input Voltage | ±400Vpeak CAT I (1MΩ), 5Vrms (50Ω) | ±400Vpeak CAT I (1MΩ) | ||||||
| Band-limiting filter | Analog form : 100MHz,20MHz,2MHz,200kHz | Analog form : 20MHz,2MHz,200kHz | ||||||
| Digital form : Either of LPF/HPF/OFF is selected with each channel. 4 independent channels | ||||||||
| Input coupling | GND, DC 1MΩ, AC 1MΩ,DC50Ω | GND, DC 1MΩ, AC 1MΩ | ||||||
| Input Impedance | 1MΩ±1% //16pF、 50Ω±1% | 1MΩ±1% //20pF | ||||||
| Probe sense | Automatic： 1：1、10：1、100：1、1000：1 Manual： 1：1、5：1、10：1、20：1、50：1、100：1、200：1、500：1、1000：1、2000：1 | |||||||
| Timebase | 500ps/div ～ 50s/div | 1ns/div ～ 50s/div | 2ns/div ～ 50s/div | 5ns/div ～ 50s/div | ||||
| Standard probe | SS-101R (multi-channel) | SS-0130R (multi-channel) | ||||||
| Roll mode | 50ms/div ～ 50s/div (100kS/s max) | |||||||
| Timebase (Clock) accuracy | ±10 ppm | |||||||
| Trigger function | ||||||||
| Trigger type | Edge, Edge ALT, Edge OR, Pulse Count, Pulse Width, Period,Dropout, TV, OR, NOR, AND, NAND | |||||||
| TV mode / Line number / Field sequence | NTSC, PAL, Custom / upto 3,000 / 1, 2, 4 & 8 fields | |||||||
| Pulse Count Trigger | 1 to 9999 events | |||||||
| Pulse Width Trigger | 15ns to 50s | |||||||
| Period Trigger | 40ns to 50s | |||||||
| Dropout Trigger | 50ns to 50s | |||||||
| Pattern Trigger | OR、NOR、AND、NAND | |||||||
| Trigger source / Status / threshhold level setting | All channels / High, Low、 Don't Care / All channels set independently | |||||||
| Trigger Source | Input CHs, Line, EXT(+/-0.5V), EXT10(+/-5.0V) | |||||||
| Trigger Slope /Coupling | +,- / AC, DC, HF Rej, LF Rej, Noise Rej | |||||||
| Display function | ||||||||
| Display size/ resolution | 7.5inch color TFT-LCD with Touch screen / VGA(640*480pixels) | |||||||
| Display mode | YT、XY、XY (Triggered) | |||||||
| Vector Display Method | Interpolation on sample points or Dots | |||||||
| Analog persistence mode | Monochrome grayscale or Color Spectrum | |||||||
| Persistence time setting | 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s & Infinite | |||||||
| Reference waveform memory | 5 waveforms | |||||||
| Panel setting memory | 5settings for Internal memory or USB memory | |||||||
| Parameter measurement, Cursor, Zoom, Calculation, Replay | ||||||||
| rameter measurement | Maximum, Minimum, Peak-Peak, RMS, Cycle RMS, Mean, Cycle Mean, Top, Base, Top-Base, +Overshoot, -Overshoot, Tr 20-80%, Tf 80- 20%, Tr 10-90%, Tf 90-10%, Freq., Period, +Pulse Count, -Pulse Count, +Pulse Width, -Pulse Width, Duty Cycle, Integral, Skew (+, -), Skew at level | |||||||
| Concurrent number of measurements / statistics display | Four parameter maximum /Max (Maximum), Min (Minimum) ,Num (Number of the total waveforms) | |||||||
| Logging item, destination | Time and parameter measurement results (conditions A, B, C, D), Pass/Fail judgment results When recording: Pop-up window, internal memory (up to 86400 entries), After recording: USB memory | |||||||
| Pass/Fail | Judgment mode: Select between Parameter judgment and Mask judgment, Judgment result: Save waveform (USB memory)/ Beep/ Pulse output (when equipped with DS-578 option)/ Logging, Page search function: Select any of Fail or Pass, you can search forward or backward | |||||||
| Cursor | Time, Amplitude, Time and Amplitude, Value at cursor | |||||||
| Zoom | Zoom key enable display at individual grid area | |||||||
| Calculation | Addition, Subtraction, Multiplication, FFT(8k points maximum, RECTANGULAR, HANNING, FLATTOP) | |||||||
| Rescaling / Unit conversion | a*x+b(x: input voltage at User defined a and b) / Volt, Ampere, Watt, degree and unit-less | |||||||
| Replay | Automatic waveform recording upto 1,024waveforms, History Replayable | |||||||
| Counter | 6-digit | |||||||
| Interface (standard) | USB 2.0(Host&Device), LAN(100Base-TX), GPIB(Factory option: DS-576) | |||||||
| AUX Interface | AUX connector for External options | |||||||
| Waveform Data Storage | UUSB memory for Binary, ASCII, Mathcad, Calculation(ASCII) & Calculation(Mathcad) | |||||||
| Hardcopy Output | Output form front panel USB port to USB memory in TIFF, BMP & PNG format or Output to PictBridge Printers | |||||||
| Calibration signal output | Square waveform at 1kHz, 3Vp-p | |||||||
| Power / power consumption | AC 90Vrms to 240Vrms, 47Hz to 63Hz, AC 90Vrms to 132Vrms, 380Hz to 420 Hz, 95VA max (60W max) | |||||||
| Dimensions (mm) / Weight | Approx. 330W × 190H ×124D / Approx. 3.7kg | |||||||
| Environmental condition | ||||||||
| Performance guarantee temperature | +10℃ to + 35℃ | |||||||
| Operation temperature and humidity / Altitude conditions | 0deg. to +40˚C at 5 to 80%(RH<=30˚C) and 55%RH or less at 40˚C non-condensation / 2,000meter or lower | |||||||
| Accessory | ||||||||
| Probe(multi-channel), Power cord, Front panel cover, CD-ROM(Instruction Manual, Remote Control Manual), User's Guide | ||||||||
| Factory options | ||||||||
| AUX IO CH1/CH2 output DS-577 (factory option) | AUX IO1: Output of CH1 input signal with applied offset voltage, AUX IO2: Output of CH2 input signal with applied offset voltage | |||||||
| AUX IO CH1/TRIG output DS-578 (factory option) | AUX IO1: Output of CH1 input signal with applied offset voltage, AUX IO2: H-level pulse signal output occurs under the following conditions ・Output when triggered ・Output when Pass/Fail judgment result becomes Pass or Fail | |||||||
| GPIB Interface DS-576 (factory option) | GPIB: IEEE488.2 (factory option) | |||||||
| 2 ways optional for Probe Power supply DS-579 | Our active probe power supply (2 systems) | |||||||